Sustainable quality, sustainable production

weak pressure

Home    weak pressure

Bracket of three houses

Description: It is a special equipment for connecting wires of lighting networks in tunnels. The connector used in this equipment is of the IPC1001 model, which enables installation and operation in current carrying lines without removing the insulation. Each bracket can be branched for one lamp using three connectors.

Bracket nine houses

Description: It is a special equipment for connecting wires of lighting networks in tunnels. The connector used in this equipment is of the IPC1001 model, which makes it possible to install and use it in current-carrying lines without removing the insulation. Each bracket can be branched for three lights by using nine connectors.

Allen wrench

  • Product code: W13
  • Packaging: 20 pieces
  • Carton weight (Kg): 2
  • Carton dimensions (cm): 25*20*10

Cable separator

Description: When installing connectors and clamps on the self-retaining cable, this wrench can be used to separate the cable strands. Also, when installing the hanging clamp, this wrench can be used to separate the messenger from the self-retaining cable.

General connector wrench

Description: It is used as an auxiliary tool for closing and installing all connectors. It is necessary to use insulating gloves when working with this part.
  • Product code: W17
  • Packaging: 20 pieces
  • Carton weight (Kg): 4
    Carton
  • dimensions(cm): 25*20*10

cable end cap

Description: When installing connectors and clamps on the self-retaining cable, this wrench can be used to separate the cable strands. Also, when installing the hanging clamp, this wrench can be used to separate the messenger from the self-retaining cable.
  • Product code: ECO101
  • Packaging: 1000 pieces
  • Cross section: AL/CO 16-95
  • Carton weight (Kg): 5
  • Carton dimensions (cm): 37*25*23

Cable protection belt

Description: The cable protection belt is used for double protection of the self-maintaining cable messenger against possible falls due to factors such as wind and other mechanical stresses.
  • Product code: SU1111
    Packaging: 40 pieces
    Cross section: aluminum / 24cm
    Carton weight (Kg): 3
    Carton dimensions (cm): 25/20/10

Cable protection belt

Description: The cable protection belt is used for double protection of the self-maintaining cable messenger against possible falls due to factors such as wind and other mechanical stresses.
  • Product code: SU1112
  • Packaging: 40 pieces
  • Cross section: galvanized / 24cm
  • Carton weight (Kg): 4
  • Carton dimensions (cm): 25/20/10

Cable protection belt

Description: The cable protection belt is used for double protection of the self-maintaining cable messenger against possible falls due to factors such as wind and other mechanical stresses.
  • Product code: SU1113
  • Packaging: 100 pieces
  • Cross section: Aluminum / 33cm
  • Carton weight (Kg): 11
  • Carton dimensions (cm): 37/25/23

Die cast hanger clamp

Description: It can be used in the network of aerial cables with insulated messenger in straight lines or up to a maximum angle of 90 degrees. The screw tightening torque is 15Nm.
  • Product code: SU1102/1
  • Packaging: 40 pieces
  • Cross section: Messenger 16-70
  • Carton weight (Kg): 10
  • Carton dimensions (cm): 37*25*23

Winch clamp (customer service clamp)

  • Product code: TE1005
  • Packaging: 100 pieces
  • Carton weight (Kg): 4
  • Carton dimensions (cm): 37/25/23

Three screw tension clamp

Description: It can be used for stretching and holding weak pressure self-supporting cables in networks with insulated messengers and in all weather conditions.

  • Product code: TE1001
  • Packaging: 28 pieces
    Cross section: Al 16-70
  • Carton weight (Kg): 5.8
  • Carton dimensions (cm): 15/32/37

Aluminum tensile clamp with steel wire

Description: It can be used to stretch and hold weak pressure self-supporting cables in networks with insulated messengers and in all weather conditions.
  • Product code: TE1003/11
  • Packaging: 30 pieces
  • Cross section:Messenger 16-25
  • Carton weight (Kg): 15
  • Carton dimensions (cm): 15/32/37

Aluminum tensile clamp with steel wire

Description: It can be used to stretch and hold weak pressure self-supporting cables in networks with insulated messengers and in all weather conditions.
  • Product code: TE1003/31
  • Packaging: 30 pieces
  • Cross section: Messenger 50-70
  • Carton weight (Kg): 15
  • Carton dimensions (cm): 15/32/37

Aluminum tension clamp with steel wire

Description: It can be used to stretch and hold weak pressure self-supporting cables in networks with insulated messengers and in all weather conditions.
  • Product code: TE1006
  • Packaging: 30 pieces
  • Cross section: Messenger 16-25
  • Carton weight (Kg): 24
  • Carton dimensions (cm): 15/32/37

Cover B3

Description: It is used as an insulating cover for connectors with a conductor cross-sectional area of 50 to 240 square millimeters.
  • Product code: B3
  • Packaging: 24 pieces
  • Carton weight (Kg): 1/5
  • Carton dimensions (cm): 48*16*23

Cover B2

Description: It is used as an insulating cover for connectors with a conductor cross-section of up to 120 square millimeters.

  • Product code: B2
  • Packaging: 50 pieces
  • Carton weight (Kg): 2
  • Carton dimensions (cm): 48*16*23

joint connector (mouf)

Description: It is used to connect and connect insulated aerial cables (ABC) in self-supporting cable distribution networks. This product is used for cables up to size 16-25-35-50-70.

  • Product code: co1060/1
  • Packaging: 65 pieces
  • Cross section: Al 16 and Al 16
  • Carton weight (Kg): 5/3
  • Carton dimensions (cm): 25*20*10

joint connector (mouf)

Description: It is used to connect and connect insulated aerial cables (ABC) in self-supporting cable distribution networks. This product is used for cables up to size 16-25-35-50-70.

  • Product code: co1060/2
  • Packaging: 65 pieces
  • Cross section: Al 25 and Al 25
  • Carton weight (Kg): 5/3
  • Carton dimensions (cm): 25*20*10

joint connector (mouf)

Description: It is used to connect and connect insulated aerial cables (ABC) in self-supporting cable distribution networks. This product is used for cables up to size 16-25-35-50-70.

  • Product code: co1060/3
  • Packaging: 65 pieces
  • Cross section: Al 35 and Al 35
  • Carton weight (Kg): 5/3
  • Carton dimensions (cm): 25*20*10

joint connector (mouf)

Description: It is used to connect and connect insulated aerial cables (ABC) in self-supporting cable distribution networks. This product is used for cables up to size 16-25-35-50-70.

  • Product code: co1060/4
  • Packaging: 65 pieces
  • Cross section: Al 50 and Al 50
  • Carton weight (Kg): 5/3
  • Carton dimensions (cm): 25*20*10

joint connector (mouf)

Description: It is used to connect and connect insulated aerial cables (ABC) in self-supporting cable distribution networks. This product is used for cables up to size 16-25-35-50-70.

  • Product code: co1060/5
  • Packaging: 65 pieces
  • Cross section: Al 70 and Al 70
  • Carton weight (Kg): 5/3
  • Carton dimensions (cm): 25*20*10

Two screw aluminum connector

Description: It is used to connect aluminum to aluminum in parts of the self-supporting cable network that does not include mechanical tension. The recommended tightening torque is very necessary for two-way communication. The body of the connector is made of corrosion-resistant aluminum with high conductivity and low electrical resistance. The tightening torque of the screw is 21Nm.

  • Product code: CO1101
  • Packaging: 50 pieces
  • Cross section: Main: Al 35-70 – Tap: Al 35-70
  • Carton weight (Kg): 16
  • Carton dimensions (cm): 37*25*23

Two screw aluminum connector

Description: It is used to connect from aluminum to aluminum in parts of the cable network that does not include mechanical tension. The body of the connector is made of corrosion-resistant aluminum with high conductivity and low electrical resistance. The tightening torque of the screw is 15Nm.

  • Product code: CO1101
  • Packaging: 50 pieces
  • Cross section: Main: Al 35-70 – Tap: Al 35-70
  • Carton weight (Kg): 16
  • Carton dimensions (cm): 37*25*23

Two screw aluminum connector

Description: It is used to connect aluminum to aluminum in parts of the self-maintaining cable network that does not include mechanical tension. The recommended less torque is very necessary for two-way communication. The body of the connector is made of corrosion-resistant aluminum with high conductivity and low electrical resistance. The tightening torque of the screw is 21Nm.

  • Product code: CO1003
  • Packaging: 100 pieces
  • Cross section: Main: Al 6-95 – Tap: Al 6-95
  • Carton weight (Kg): 5.12
  • Carton dimensions (cm): 37*25*23

Two-pin full-metal connector

Description: It is used to connect aluminum to copper in parts of the network that do not include mechanical tension. The body of the connector is made of aluminum coated with tin. The screw tightening torque is 40Nm.
  • Product code: CO1045
  • Packaging: 16 pieces
  • Cross section: Main: Al/Cu 50-240 – Tap: Al/Cu 50-240
  • Carton weight (Kg): 5
  • Carton dimensions (cm): 25*20*10

Two-pin full-metal connector

Description: It is used to connect aluminum to copper in parts of the network that do not include mechanical tension. The body of the connector is made of aluminum coated with tin. The screw tightening torque is 40Nm.
  • Product code: CO1045
  • Packaging: 16 pieces
  • Cross section: Main: Al/Cu 50-240 – Tap: Al/Cu 50-240
  • Carton weight (Kg): 5
  • Carton dimensions (cm): 25*20*10

wire to cable connection connector (32 teeth)

Description: It is used to connect aluminum and copper wires to aluminum and copper insulated conductors. The screw installed on the connector is insulated. This connector can be installed on hot lines without removing the conductor insulation.

  • Product code: IPC1008
  • Packaging: 50 pieces
  • Cross section: Main: Al 25-95/ Cu 25-70 – Tap: Al 2.5-95/ Cu 1.5-70
  • Carton weight (Kg): 7
  • Carton dimensions (cm): 37*32*15

1 to 4 branch extension connector

Description: The multi-component connector is a special design that facilitates the increase of the number of branches simultaneously up to four branches. Each sub-branch is created by the operation of a separate screw. This connector has penetration variety and parallel groove. The screw tightening torque is 15Nm.
  • Product code: IC1002
  • Packaging: 30 pieces
    Cross section: Al 4*(10-35) / Cu 4*(1.5-25) – Al 4*(10-35) / Cu 4*(1.5-25)
  • Carton weight (Kg): 8.5
  • Carton dimensions (cm): 37*25*23

1 to 2 branch extension connector

Description: The multi-component connector is a special design that facilitates the increase in the number of branches up to two branches at the same time. Each sub-branch is created by the operation of a separate screw. This connector has penetration variety and parallel groove. The tightening torque of the screw is 15Nm.
  • Product code: IC1001
  • Packaging: 56 pieces
  • Cross section: Al 4*(10-35) / Cu 4*(1.5-25)
  • Carton weight (Kg): 8.5
  • Carton dimensions (cm): 37*25*23

1 to 2 branch extension connector

Description: The multi-component connector is a special design that facilitates the increase in the number of branches up to two branches at the same time. Each sub-branch is created by the operation of a separate screw. This connector has penetration variety and parallel groove. The tightening torque of the screw is 15Nm.
  • Product code: IPC1005/2
    Packaging: 56 pieces
    Cross section: Al 4*(10-35) / Cu 4*(1.5-25)
    Carton weight (Kg): 11
    Carton dimensions (cm): 37*25*23

Cable to cable connection connector without header nut

Description: It is used for branching from the main self-sustaining cable in the network. It is generally used to connect branch and main conductors of copper and aluminum. The screw tightening torque is 15Nm.
  • Product code: IPC1004/1
  • Packaging: 40 pieces
  • Cross section: Main:
  • Al/Cu 25/120 – Tap: Al/Cu 16/95
  • Carton weight (Kg): 8
  • Carton dimensions (cm): 37*32*15

Cable-to-cable connection connector with header nut

Description: It is used for branching from the main self-sustaining cable in the network. It is generally used to connect branch and main conductors of copper and aluminum.
  • Product code: IPC1004
  • Packaging: 40 pieces
  • Cross section: Main:
  • Al/Cu 25/120 – Tap: Al/Cu 16/95
  • Carton weight (Kg): 9
  • Carton dimensions (cm): 37*32*15

Subscriber branch connector without header nut

Description: The connector is generally used to connect various combinations of main and branch conductors made of copper and aluminum. It has the ability to be installed on hot lines without removing the insulation of the conductors. The screw tightening torque is 15Nm.
  • Product code: IPC1003/1
  • Packaging: 100 pieces
  • Cross section: Main: Al/Cu 25/95 – Tap: Al/Cu 6/35
  • Carton weight (Kg): 8
  • Carton dimensions (cm): 37*32*15

Subscriber branch connector with header nut

Cable to cable connection connector (64 teeth)

Lighting branch connector without lead nut

Lighting branch connector with lead nut